Dayton 36” Quiet Whole House Fan

$997.00

Dayton Brand Whole House Fan, Belt Drive, 2 Speed, Propeller Dia 36 In, CFM High 10600, CFM Low 7000, HP 1/2, Fan RPM 415/275, Voltage 115, 60 Hz, Single Phase, Amps 8.2 / 6.4, Height 15 In, Width 40 In, Depth 40 In, Ceiling Mounting Location, Includes 1×4 Wooden Plenum Box, Rubber Mounting Gasket, Two-speed switch and 12-hour timer

Add to Compare
SKU: DayPrem36 Category:

Description

Dayton Brand Whole House Fan, Belt Drive, 2 Speed, Propeller Dia 36 In, CFM High 10600, CFM Low 7000, HP 1/2, Fan RPM 415/275, Voltage 115, 60 Hz, Single Phase, Amps 8.2 / 6.4, Height 15 In, Width 40 In, Depth 40 In, Ceiling Mounting Location, Includes 1×4 Wooden Plenum Box, Rubber Mounting Gasket, Two-speed switch and 12-hour timer

Intermatic spring wound timer switch is simple and of higher quality. It is rated for up to 15 amps and has a Hold Feature which allows you to turn the knob left to continuous run,(“Hold”) or set to it to run any length of time up to 12 hours by turning it to the right.

With the timer on, the higher quality 15 amp two speed rocker switch will select high or low speed. This two speed switch does not have an off position because the timer turns power off to this switch.


Truss Shutter

If your roof is made with trusses you will need a special shutter that allows the truss to run right through the middle of the opening. That is because you should never cut a truss because it is engineered to be strong only when it is complete with all of its members. There is one panel in the middle of the shutter that does not open and covers the truss. Another option would be to use a regular shutter but lower the ceiling in the area of the fan by about 6 inches so the regular shutter would have room to open entirely below the truss.


Premium Shutter

If your roof is made with conventional rafters and joists, you just need the regular premium shutter.

Additional information

Weight 82 lbs
Item

whole house fan

Fan Type

Belt Drive

Speed

2

Propeller Diameter (In.)

36''

CFM High Speed

10600

CFM Low Speed

7000

HP

1/2

Fan RPM

415/275

Voltage (AC)

115

Hz

60

Phase

Single

Watts

850/567

Height (In.)

15''

Width (In.)

40

Depth (In.)

40

Coverage (Sq Ft.)

2500

Power Cord Length (Ft.)

Hardwired

Motor Type

Split Phase

Housing Material

Powder Coated Steel

Housing Finish

Gray

Propeller Material

Steel

Number of Blades

4

Agency Compliance

UL

Includes

1×4 Wooden Plenum Box, Rubber Mounting Gasket, Two-speed switch and 12-hour timer

Bearing Type

Ball

Switch Type Included

2 Speed Decora White

Shutter for Truss Roofs Available

Yes

Amps High Speed

8.2 A

Amps Low Speed

6.4 A

Sq. In. Intake Venting Req.

1960

Power High Speed

850

Power Low Speed

567

Ceiling Opening

35 7/8" x 35 7/8"

Ceiling Space Required Overall Size (Truss Shutter)

42" (parallel to truss) x 40" (straddling truss)

Ceiling Opening (Truss Shutter)

40 1/8" (parallel to truss) x 37 7/8" (straddling truss)

Ceiling Space Required Overall Size Shutter

38" x 38"

Height Required Vertically Above Joist to Rafter (Inches)

35 7/8" x 35 7/8"

Overall Footprint of Fan on Top of Joists

36"

Brand

Dayton

GTIN

00190735145753

Reviews

There are no reviews yet.

Be the first to review “Dayton 36” Quiet Whole House Fan”

Your email address will not be published. Required fields are marked *

You may also like…

  • 36 In. Ceiling Shutter Premium Quality

    $287.00
    Add to cart Add to Compare
  • 36 In. Truss Shutter Premium Quality

    $267.00
    Add to cart Add to Compare